Performance and Characteristics
A.The built-in continuous rotating infeed system effectively
reduces the space occupied. The consistency of preform position
stream lines the process.
B.38mm pitched, more preforms are uninterruptedly heated within the
same distance, which can improve the efficiency and 30% energy
saving.
C.Hinged oven holders make it easy for the operators to change
infrared tubes and do maintenance.
Technical Parameters
| Items | UNIT | DY-8CR600S | |
| Molding Specification | Clamping force | kg | 70000 | |
| Clamping stroke | mm | 120 | |
| Stretching stroke | mm | 250 | |
| Bottom Stroke | mm | 30 | |
| Cavity space | mm | 76 | |
| Number of cavities | pc | 8/4 | |
| Bottle Specifications | Max Bottle volume | L | 0.75/1.5L | |
| Max Neck Diameter | mm | 18～30 | |
| Max Bottle Diameter | mm | 70 (8cavities) 106 (4cavities) | |
| Max Bottle Diameter | mm | 320 | |
| Bottle Preform Heating Carriage Space | mm | 38 | |
| Max Production Capacity | BPH | 18000 | |
| Main Motor Specification | Rated power | KW | 110 | |
| Power consumption | KW | 35～50 | |
| Compressor Specifications | Blowing Pressure | Kg/c㎡ | 28～32 | |
| HP Air Consumption | m3/min | 10 | |
| Cold Water Specifications(Chiller) | Operating Pressure | Kg/c㎡ | ≥4 | |
| Temp range | ℃ | 5-20 | |
| Chilling Capacity | kcal/hr | 21100 | |
| Cold water flow rate | L/min | 70 | | Kg/c㎡ |
Cooling Water Specifications (Cooling tower) | Operation pressure | Kg/c㎡ | 3 | |
| Temp range | ℃ | ≤37 | |
| Cooling water flow rate | L/min | 85 | |
| Main Machine Specifications | Main Machine size (LXWXH) | mm | | |
| Main Machine Weight | Kg | 8500 | |
| Whole Machine Specifications | Whole Machine size (LXWXH) | mm | | |
| Whole Machine weight | Kg | 9500 | |
Note:
a.The actual output capacity depends on the preform quality and
bottle shape.
b.Due to continuous technical development specification would be
improved without prior notice.
c.Special designs correspond to customers needs.
Machine Configurations
| Item | Items | Brand |
| 1 | PLC | Omron, Japan |
| 2 | Touch screen | Omron, Japan |
| 3 | Servo motor | Omron, Japan |
| 4 | Reduction drive | Newcarter (Germany) |
| 5 | HP blow valve (Air Source recovery system) | Sechi (Switzerland) |
| 6 | Acting cylinders | SMC(Japan) Or Lishi (Germany) |
| 7 | operating valve | PAKKER (USA) |
| 8 | Control button/ intermediate relay. | Omron, Japan |
| 9 | Intelligent Voltage regulator. | Omron, Japan |
| 10 | Infrared tungsten lamp tube. | LIANGGU, Zhejiang |
Note : Due to the upgrading of models, the actual configuration may
be inconsistent with above form. Some parts may be replaced by
other brand parts which in equivalent price and grade.
Pre-Sales Service
* Inquiry and consulting support.
* 24 hours on line anwser your confusion.
* Welcome to view our Factory.
* Help client choose the suitable machine.
* Take video as client's request.
* Take client's other need into consideraion.
After-Sales Service
* We send the engineers overseas to help client installing,
commissioning and training.
* We provide useful documents with machine.( Machine layout,
Electricity diagram,Machine certificate, General manual
book/maintenance book)
* All spare parts are always available and free for your request in
first year.
* You can mail/call us at any time if have any problem. And our
most experienced is always free for giving you consulting service.
