Semi Automatic Stretch Bottle Making Moulding Machine For Soft
Drink PET Bottle
---Features
1) Stable performance with advanced PLC
2) Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in theinfrared preheater
3) High adjustability to enable the preheater to preheat performs
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the preheater with an automatic thermostatic apparatus
4) High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into the
state of safety in caseof a breakdown in certain procedure
5) No contamination and low noise with the air cylinder to drive
the action instead of the oil pump
6) Satisfaction with different atmospheric pressure for blowing and
action by dividing the blowing and action into three parts in the
air pressure diagramof the machine
Semi Automatic Blow Moulding Machine For Soft Drink PET Bottle
---Technical parameters
Type | Item | Unit | Technical Data |
Container | Bottle material | | PET/PVC/PE |
Container volume of bottle | ml | 200-2500 |
Theoretical output | P/H | 1000(500ml) |
Max. bottle height | mm | 360 |
Max. bottle diameter | mm | Φ180 |
Moulding | Max mould plate dimension | mm | 420×500 |
Max mould thickness | mm | 250 |
Clamping force | KN | 150 |
Mould opening stroke | mm | 240 |
Air Compressor | Air compressor | M3/Mpa kw | ≥1.0/3.0 11 |
Air pressure for blowing | M3/Mpa | 30 |
Main Machine Electricity | Power | KW | 6 |
Voltage/Frequency | V/HZ | 380/50 |
Machine Size And Weight | Host Size | M | 1.53×0.62×2.00 |
Host Weight | T | 0.6 |
Heater Size | M | 1.8×0.5×1.6 |
Heater Weight | T | 0.3 |
High Pressure Compressor Size | M | 1.90×0.75×1.50 |
Air Filter Weight | Kg | 10×2pcs |
Auto-emergency alarm | Safety inter-loching device |
Semi Automatic Stretch Blow Moulding Machine For Soft Drink PET
Bottle
Brand List
| Electrical components | Cylinders |
| PLC | Taiwan Delta | clamping cylinder | Japan SMC |
| touch screen | Taiwan Delta | stretching cylinder | Japan SMC |
| relay | France Schneider | preform-feeding flipping cylinder | Germany FESTO |
| circuit breaker | France Schneider | bottle-takeout flipping cylinder | Germany FESTO |
| air switch | France Schneider | first-stage, second-stage slide cylinder | Japan SMC |
| power supply | France Schneider | heating cylinder | Japan SMC |
| proximity switch | France Schneider | Preform-separating cylinder | Japan SMC |
| photoelectric switch | France Schneider | Manipulator cylinder | Japan SMC |
| Air Filtration | valves |
| low pressure oil-water separator | Germany FESTO | high pressure exhaust valve | USA PARKER |
| low pressure press-regulating valve | Germany FESTO | high pressure one-way valve | Germany FESTO |
| low pressure lubricator | Germany FESTO | low pressure operating valve | Japan SMC |
| | high pressure blowing valve | USA PARKER |
--- After Service
We have 1 year warranty, and lifetime maintenance.
Within one year, if there is some accessory going wrong, we will
send you the accessory at once, free of charge.
1). Within one month, if the machine is of any big fails, we will
send you a new machine.
2). Within one year, if you send back the equipment for repair, we
will be responsible for the repair, including the changes of
accessories; Both of them are free of charge.
3). After one years, we offer to repair the machine, but we quire
for the cost of the changed parts, not for manual cost.
4). No responsibility for man-made destroy.
5). If the buyer has any questions from our technical department,
we can supply on-line service Or we can send professional engineers
to help you debug them.
