Small Full Automatic Bottle Making Machine / PET Stretch Blow
Moulding Machine
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity
invariable.
5). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
noise.
| Item | General Infomation | |
| Container | Theoretical Output | 2000pcs/hr |
| Max.container volume | 2L |
| Max.neck diameter | 45mm |
| Max.container diameter | 175mm |
| Max.container height | 350mm |
| Number of cavity | 2 Cav |
| Electrical System | Total Power | 30kw |
| Use Power | 25kw |
| Air System | Working Pressure | 1.0Mpa |
| Low Pressure Consuming | 1600L/min |
| Blow Pressure | ≤3.5Mpa |
| High Pressure Consuming | 2400L/min |
| Chiller Water | Opreating Pressure | 0.3-0.5Mpa |
| Temperature | 10-12°C |
| Flow Rate | 45L/min |
| Machine | Machine Dimension | 2.5*2.0*2.0m |
| Machine Weight | 1900kg |
| Feeding Machine Dimension | 2.0*1.0*2.0m |
| Feeding Machine Weight | 2000kgs |
1. PET material because of its exceptional performance, are
generally used two-step molding process, by the preform injection
molding machine to produce a 24-hour After cooling, the internal
molecular structure of their re-arranged in an orderly manner, and
blowing for the next step to create good conditions, so that more
excellent blowing performance products. Such as the famous
Coca-Cola Company is currently using this technology. Its
production processes are as follows:
PET materials→Dryer→Injection machine(with Chiller)→Bottle Proferms
2. Cap on in the injection molding machine is completely automated
production, its production process is as follows:
PP/PE material→load material→dry→heat material →injection→cooling
molding →preforms→caps
Ø Delivery Time: 15~45 days after get down payment & bottle/label
samples
Ø Coming Document:
1) Machine Quality Guarantee
2) Complete set install & maintain instruction Book in English
language
3) Complete Document for customer to clear its custom
Ø Packaging requirement:;
1) The special packaging box is according to the immunity standard
in China,it suits for long-distance transport, damp proof,
rustproof, land way and seaway
2) Transportation ways: Sea transportation
We have 1 year warranty, and lifetime maintenance.
Within one year, if there is some accessory going wrong, we will
send you the accessory at once, free of charge.
1). Within one month, if the machine is of any big fails, we will
send you a new machine.
2). Within one year, if you send back the equipment for repair, we
will be responsible for the repair, including the changes of
accessories; Both of them are free of charge.
3). After one years, we offer to repair the machine, but we quire
for the cost of the changed parts, not for manual cost.
4). No responsibility for man-made destroy.
5). If the buyer has any questions from our technical department,
we can supply on-line service Or we can send professional engineers
to help you debug them
