Low Energy Automatic PET Plastic Bottle Blow Molding Machine For
Water Production Line
Brife Information
Automatic PET Plastic Bottle Blow Moulding Machine is suitable for
blowing PET bottles of various shapes, volume from 100 ml to 2000
ml, wide application for blowing mineral water bottles, carbonated
water bottles and juice bottles.
1. High Automatization
2. High Intelligence:The machine can be controlled through touch
screen and running status is shown on it.
3. High Quanlity:Steady infrared heating system blowing and highly
precise blow-mould closing system ensure quality.
4. No Contamination:Closed production zone, good self-lubrication
system avoid contamination.
5. Low Cost:Low consumption of electricity, air and water.
6. High Transparency:Easy maintenance, absolute safely, visual
inspection, low noise.
Technical Data
ITEM | RM-2000 | RM-4000 | RM-6000 |
Theoretical output | 2000 | 4000 | 6000 |
Max.container volume | 1.25L | 1.25L | 0.7L |
Max.neck diameter | 38MM | 38MM | 38MM |
Max.container diameter | 80MM | 80MM | 60MM |
Max.container height | 320MM | 320MM | 265MM |
Number of cavity | 2 | 4 | 6 |
Number of lamp | 28 | 70 | 60 |
Max.heating power | 42KW | 84KW | 90KW |
Installation power | 50KW | 95KW | 100KW |
Actual power consumption | 35KW | 40KW | 50KW |
Operatating low pressure | 0.7Mpa | 0.7Mpa | 0.7Mpa |
Low pressure consuming | 1400L/min | 2000L/min | 2000L/min |
Blowing pressure | 3.5Mpa | 3.5Mpa | 3.5Mpa |
High pressure consuming | 3500L/min | 5000L/min | 4500L/min |
Operating pressure | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.5Mpa |
Temperatuer | 10 | 10 | 10 |
Flow rater | 30 L/min | 40 L/min | 50L/min |
Machine dimension | 2.7×1.8×2.2 | 4×2×2.2 | 4.9×2.15×2.2 |
Machine weight | 3500Kg | 4800Kg | 5000Kg |
Machine Advantages
1> Energy saving
2> Easy to operate, just need feeding preform, other work is
automatic.
3> Suitable for hot filling, PP, PET bottle blowing
4> Suitable for different preform neck size, it can change
preform jigs very easily.
5> Mold replacement very easily.
6> Oven design in reasonable, adopt blowing-type, water cooling,
air cooling all have. Suitable for hot environment to work, the
preform neck can’t distortion.
7> The heating lamp adopt infrared quartz lamp, not easy to
damager, it is different than semi-auto blowing machine lamp. So it
no need frequently to change lamp. The lamp life is long, even it
is broken, it can use also.
8> Our hand feeding stretch blow molding machine can add
autoloader+manipulator to became fully automatic.
9> Our machine is more safety and stabilization.
10> Our clamping unit adopt clooked arm configuration
self-lubricating system. So very stabilization and no noise.
WELCOME TO CONTACT US FOR FURTHER COOPERATION
