High Quality Plastic Garbage SUS 304 Can
PET Preform Injection Molding Machine Manufacturer
Description
Injection unit:
1) Four injection pressures and speeds with three additional
pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level
alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine
to provide easy access
Mold
Our mold producing center produces exact mold ,adopts the high
grade material to make. The perform mold uses the hot runner
technology, inside uses the imported steel, the surface’s
brightness is very high and the service time is very long.
The design of equipment is logical, easily operation.
High level automation , using famous imported hydraulic ,
electrical, sealing parts, the trouble will be less .
No matter what the product ’s outside or inside, they can get the
best guarantee, the good products rate can be above 99%.
Technical Parament
|
Unit | DS-280T |
| A | B | C |
| Injection unit |
| ew Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 21.8 | 21.8 | 18.5 |
| Shot Size(Theoretical) | cm3 | 764 | 764 | 1060 |
| Injection Weight | g | 654 | 654 | 890 |
| Injection Pressure | Mpa | 219 | 219 | 157 |
| Plasticizing Capacity | g/s | 30 | 30 | 40 |
| Screw Speed | rpm | 0-160 |
| Clamping unit |
| Clamp Tonnage | KN | 2800 |
| Toggle Stroke | mm | 550 |
| Space Between Tie Bars | mm | 580*580 |
| Mold Height | mm | 620 |
| Min.Mold Height | mm | 220 |
| Ejector Stroke | mm | 145 |
| Ejector Tonnage | KN | 70 |
| Ejector Number | PC | 9 |
| Others |
| Max.Pump Pressure | Mpa | 16 |
| Pump Motor Power | KW | 22 |
| Heater Power | KW | 16.5 |
| Machine Dimension(L*W*H) | m | 6.1*1.7*2.3 |
| Machine Weight(About) | T | 8.5 |
How to get your suitable machine or production line ?
Enquiry: Contact us by email, phone call, fax, Instant tools (Trade manager
, MSN , Skype , Whatsapp ) and let us know your enquiry.
Discussion: Specify the items you desire, confirm specification; OEM/ODM
consultation.
Quotation: Prices offered and accepted.
Placing Order: Place order as per contract or discussion.
Double confirm: Proforma invoice offered to double confirm the order for both-side
records.
Payment: Payment settled.
Producing Machine: Produce machine as per contracted term under our arrangement.
Shipping: Goods shipped as per contracted term.
Arrival: Goods arrive at local port or warehouse, depending on contracted
term.
Completeness: Order completed.
