Injection Molding Machine
PP PE PVC PET HDPE Plastic Injection Molding Machine / Plastic
Product Making Machine
Specifications
Injection Molding Machine
1.Fast injection & short cycle time
2.Installation and training provided
3.Low Energy
PP PE PVC PET HDPE Plastic Injection Molding Machine / Plastic
Product Making Machine
Introductions--- Injection Molding Machine
PET material because of its exceptional performance, are generally
used two-step molding process, by the plastic injection molding
machine to produce a 24-hour After cooling, the internal molecular
structure of their re-arranged in an orderly manner, and blowing
for the next step to create good conditions, so that more excellent
blowing performance products. Such as the famous Coca-Cola Company
is currently using this technology.
Plastic injection molding machine composed of imported advanced hydraulic components. System pressure
is controlled by proportional valve. According to users demand, a
quick mold clamping device and fast-respond excellent control
valves also can be fitted on the unit.
PP PE PVC PET HDPE Plastic Injection Molding Machine / Plastic
Product Making Machine
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional
pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level
alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine
to provide easy access
PP PE PVC PET HDPE Plastic Injection Molding Machine / Plastic
Product Making Machine
Parameters --- Injection Molding Machine
Item | Unit | Technical data |
Max. clamping force | KN | 3800 |
Max. opening force | mm | 680 |
Space between tie bars | mm | 680×680 |
Mould height | mm | 250-710 |
Max. daylight | mm | 1390 |
Ejector force | KN | 90.7 |
Ejector stroke | mm | 170 |
Ejector quantity | | 13 |
Screw diameter | mm | 65 | 70 | 75 |
Screw L/D ratio | L/D | 22.6 | 21 | 19.6 |
Theoretical shot volume | cm3 | 1061 | 1231 | 1413 |
Plasticising weight(PS) | g | 966 | 1120 | 1286 |
Injection pressure | Mpa | 203 | 175 | 152 |
Theoretical injection rate(PS) | g | 308 | 357 | 410 |
Plasticising capacity(PS) | g/s | 50.6 | 60.5 | 71.5 |
Screw torque | N.m | 2860 |
Max. screw rotate speed | r/min | 150 |
Injection stroke | mm | 320 |
Carriage push force | KN | 110.5 |
Pump motor power | KW | 37 |
Pump pressure | Mpa | 16 |
Heating power | KW | 25 |
Heating zone | | 5 |
dimensions | m | 6.8×2.0×2.3 |
Net weight | t | 15 |
International designation | | 3800-2150 |
