Factory Direct Sale PVC Benchtop Injection Moulding Machine
Maintenance
Features:
This machine is special machine to inject PET preform. Machine is
equipped with robot hand (preform manupulator) that can increase
the capacity production. The sparepart that we use is imported
sparepart. For the PLC we use siemens brand from Germany.
1) Double cylinder balancing injecting
2) High-torque oil-motor pre-plasticizing
3) Five-pivot double-toggle minus relief angle mould locking
4) Cabinet-type holder-integrated platen
5) Supporter tail platen integrated structure
6) Oil-motor driving gear mould height adjusting
7) Storage-type grease automatic lubricating system
8) Pressure and flow whole-proportion running
9) High-performance, low-noise oil pump
10) Multi-step pressure and speed adjusting
11) Computer-control with Chinese or English show
12) 5" color LCD screen
13) High-precision position transducer
14) Digital memory for mould group
15) Our machine have CE Certificate
A Injection Unit --- PET Preform Injection Moulding Machine
•A01) Oil temperature indication
•A02) Adjustable such back before and after refilling
•A03) Auto sprue break
•A04) Linear transducer to control programmable injection position
•A05) Cold start screw prevention
•A06) Sliding Mechanism for hopper
•A07) Gas Nitrated hardened screw and Barrel
•A08) Screw back pressure con troll with pressure relief valve
•A09) Hand Operated Lubrication Unit
B. Clamping Unit --- PET Preform Injection Moulding Machine
•B01) Five Point twin toggle locking system
•B02) Case Hardened toggle, Brackets and links with hardened
PIN & BUSH
•B03) Motorized mould height adjustment for quick mould change
•B04) Auto tonnage setting facility
•B05) Low pressure precise mould protection with pressure and time
setting
•B06) Five stage Mould closing
•B07) Five stage Mould opening
•B08) Hydraulic cushioning for consistent mould opening position
•B09) Linear transducer to control programmable clamp system
•B10) Electrical and hydraulic (Dump value) interlock safety gate
•B11) Moving platen with mechanical support with Teflon
•B12) Hydraulic Ejector with Multi stroke
•B13) Auto lubrication unit
C. Ejector --- PET Preform Injection Moulding Machine
•C01) Linear transducer to control programmable ejector position
•C02) Multiple stroke ejection
•C03) Ejector forward/ backward speed adjustable
•C04) Ejector forward/ backward pressure adjustable
•C05) Two stage in ejector forward/ backward operation
•C06) Additional safety of sensing ejector backward position with
proximity switch
D. Hydraulic --- PET Preform Injection Moulding Machine
•D01) Compact and Simple design
•D02) Sealing ring imported from Japan, a total four leak-proof
protection to
prevent the oil leakage.
•D03) Proportional value for pressure and speed
•D04) Variable displacement pump system attached with pulse
absorber
•D05) High magnetic closed-loop oil filter to effectively remove
debris of the
oil, the filtration is up to 10um.
•D06) Easy access to hydraulic elements for ease maintenance
E. Controller--- PET Preform Injection Moulding Machine
•E01) Display type LCD QVGA B/W of 5.7 “with 100 membrane keys
•E02) Multi-CPU control, with 32 bit
•E03) Precise temperature control, the precision is of ±1 degree
•E04) Four forms of switch at the end of injection, they are time,
location, pressure, and speed.
•E05) Breaker and air switch are imported from Japan, the brand of
Micro switch is Omron
•E06) Instruction cycle time of controller in 0.4 microseconds
SZ-5500A High Quality PET Preform Injection Moulding Machine
Item | Unit | Data |
Max. clamping force | KN | 5500 |
Max. opening force | mm | 820 |
(V×H)Space between tie bars | mm | 810×810 |
(min-max)Mould height | mm | 350-820 |
Max. daylight | mm | 1640 |
Ejector force | KN | 150 |
Ejector stroke | mm | 210 |
Ejector quantity | | 13 |
Screw diameter | mm | 80 | 85 | 90 |
Screw L/D ratio | L/D | 22.3 | 21 | 19.8 |
Theoretical shot volume | cm3 | 2141 | 2418 | 2710 |
Plasticising weight(PS) | g | 1948 | 2200 | 2466 |
Injection pressure | Mpa | 188 | 167 | 149 |
Theoretical injection rate(PS) | g | 427 | 482 | 541 |
Plasticising capacity(PS) | g/s | 80 | 100 | 118 |
Screw torque | N.m | 5170 |
Max. screw rotate speed | r/min | 150 |
Injection stroke | mm | 425 |
Carriage push force | KN | 175 |
Pump motor power | KW | 55 |
Pump pressure | Mpa | 16 |
Heating power | KW | 33 |
Heating zone | | 6 |
Size (L×W×H) | m | 8.4×2.2×2.6 |
Net weight | t | 23.5 |
International designation | | 5500-4040 |
Reliable Services
The sample service
1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may
see the operation of the machines here . We will make the
arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the
machines from us ,we can tell you their contact information, you
can go to visit their factory.
Customized service
1.we can design the machines according your requirements(material
,power,filling type,the kinds of the bottles, and so on).
2.at the same time we will give you our professional suggestion .
After-sales service
1.we will provide the bill of load on time to make sure you can get
the machine quickly
2.when you finish the Preparation conditions ,our engineer will go
to your factory for the installation, testing and also training .
3.we provide one year warranty with spare parts free.
